LED ceiling light with sensor and backup battery | PIR sensor | 16 W | 3000K | 1280lm | Diameter: 300mm

This Nedis® LED ceiling light with motion detection combines the best of both worlds as it combines a ceiling light and a security light in one light.
In normal operation, the rated power of the LED is 16 watts. In the event of a power failure, the backup battery guarantees 3 hours of light with a nominal output of 3 watts. Ideal for stairwells, corridors, dark areas or for automatically lighting your escape route in the event of a power failure.
The 360° motion sensor detects even the smallest of movements.
The ambient light and time delay settings ensure that the light is never left on unnecessarily for too long. Thanks to the IP54 protection class, you can use the device both outdoors and indoors.

Number of switching cycles:	10000 switching cycles
Warm-up time up to 60% light:	Less than 1s
Batteries included:	Yes
Motion detection area:	0.0 - 6.0 m
motion sensor:	Yes
Twilight setting:	3 - 2000 lux
Detector Technology:	PIR sensor
Detector Angle:	360º
Dimmable:	no
Input voltage:	230VAC 50Hz
energy class:	A++
Energy consumption per 1000 hours:	16kWh
required batteries (included):	Built-in Lithium Ion
Color:	White
color temperature:	3000K
Color rendering index (Ra):	80
IP protection class:	IP54
power factor:	≥ 0.5
Light included:	Integrated
Light color:	Warm white
Luminous Flux Stability Factor:	70%
Assembly:	Yes
Nominal lamp life:	20000h
Nominal luminous flux:	1280 lm
Mercury content of the lamp:	0mg
Start time:	Less than 0.2s
Beam angle:	360º
Power source type:	mains power supply
Technology:	LEDs
Wattage:	16 w